ATV Source.com | Calendar | ATV/UTV Reviews | ATV/UTV News | ATV/UTV Product Reviews | ATV/UTV Racing | ATV/UTV Trails | ATV/UTV Videos

ATVSource.com Social Community Forums

ATVSource.com is a social community site based on the needs of ATV/UTV fans alike.
It is currently Mon Sep 25, 2017 2:53 am

All times are UTC - 5 hours




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: 90 eton viper
PostPosted: Mon Jun 02, 2008 10:41 am 
Offline
Still on the Trailer Member

Joined: Mon Jun 02, 2008 10:30 am
Posts: 2
I have a 90cc eton viper 2 stroke with a bog down problem. Bike fires right up and idles fine, when you advance the throttle it dies and slows down if I'm even able to get any speed going. If you cover the air box intake almost completely it will run allot better. Or if you take off the elbow from the carb to the air box and place your hand on the carb it will run great. I have cleaned and cleaned the carb and jets, replaced the air box with new filter, new plug. I thought I was getting too much air from the air box because it had a gap between the 2 pieces. This bike is early 2000 model don't remember what year, but I bought it new and have never had any problems until now. It has gone thru 2 kids and has been great. I need some help before I give up and take it to a dealer, my daughter rides it now and doesn't understand why she can't ride!!!

Thanks for any and all help!!


Top
 Profile  
 

ADVERTISEMENT


 Post subject: Re: 90 eton viper
PostPosted: Wed Jun 04, 2008 6:32 am 
Offline
Still on the Trailer Member

Joined: Mon Jun 02, 2008 10:30 am
Posts: 2
Does anyone have some advice???


Top
 Profile  
 
 Post subject: Re: 90 eton viper
PostPosted: Tue Nov 24, 2009 11:45 am 
Offline
Still on the Trailer Member

Joined: Tue Nov 24, 2009 11:43 am
Posts: 2
I am having same problem right now anybody have an answer?


Top
 Profile  
 
 Post subject: Re: 90 eton viper
PostPosted: Tue Nov 24, 2009 12:49 pm 
Offline
Still on the Trailer Member

Joined: Thu Nov 05, 2009 12:27 pm
Posts: 7
sound like plugged jets in carb, take off carb, soak in gas or carb cleaner, then use torch tip cleaner, like a little wire to clean jets , then blow out with air.my buddy had same problem with kids eton, thats what he did works fine now.


Top
 Profile  
 
 Post subject: Re: 90 eton viper
PostPosted: Mon Nov 30, 2009 6:27 am 
Offline
Still on the Trailer Member

Joined: Tue Nov 24, 2009 11:43 am
Posts: 2
Thank you! I appreciate your time to answer this. I figured I just didn't take the time to do it right the first time! It is amazing we are all rushed to do things and always find time to do things twice!!


Top
 Profile  
 
 Post subject: Re: 90 eton viper
PostPosted: Mon Nov 30, 2009 7:28 am 
Offline
ATVing To The End
User avatar

Joined: Fri Nov 21, 2003 4:56 pm
Posts: 3812
Location: Ohio
Might want to add some fuel stabilizer to the gas tank next time it sits unused for a few months, also.

I keep a small roll of fine piano wire on hand for jet cleaning. When worked back and forth while submerged in carb cleaner, it does a good job.


Top
 Profile  
 
 Post subject: Re: 90 eton viper
PostPosted: Sun Aug 21, 2011 11:47 am 
Offline
Still on the Trailer Member

Joined: Sun Aug 21, 2011 11:42 am
Posts: 1
Try checking your spark arrestor. They will plug up pretty bad and cause the problems you are talking about.


Top
 Profile  
 
Display posts from previous:  Sort by  






Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group