|
Page 1 of 1
|
[ 2 posts ] |
|
Author |
Message |
hangingon
|
Posted: Tue Oct 02, 2012 10:09 pm |
|
 |
Still on the Trailer Member |
Joined: Tue Oct 02, 2012 9:44 pm Posts: 1
|
I'm needing help with a 2000 eton thunder 90 The electric start is not working. It started off the elect. start would not work now the horn stop working. The battery is good I pulled all the wire connectors and cleaned them used dilect grease. I pulled the starter out and tested it. changed the inline fuse on the + battery side wire. The start / stop button works & key switch. inside the housing for the horn and elect. start is clean. The quad has a place for a kick start but the kick arm was not on the quad. I used vice grips to start it so the quad starts right up. I don't know what to try or check next the elect start worked when we got it then after about a year it stopped at one point it stopped working & I charged the battery & tried it & it worked I use a battery tender on my quads. I also hooked my battery up from my quad & still will not turn over. It makes no noise at all no click nothing. All help welcome!
|
|
Top |
|
 |
* -- ATVSOURCE START AD AFTER FIRST POST IN TOPIC -->
* -- ATVSOURCE END AD AFTER FIRST POST IN TOPIC -->
fastbreak05
|
Posted: Tue Apr 30, 2013 5:59 pm |
|
 |
Still on the Trailer Member |
Joined: Sun Apr 28, 2013 7:05 pm Posts: 1
|
Can't get the little rascal started! I have gas, fuel, spark and just changed ignition coil!?
|
|
Top |
|
 |
* -- ATVSOURCE START AD AFTER FIRST POST IN TOPIC -->
* -- ATVSOURCE END AD AFTER FIRST POST IN TOPIC -->
|
|